Logo_ESKAN.png
UA EN

Locator Set System for line and cable fault location

The Locator Set is used particularly for accurate location of underground cables and routes of metallic gas or water pipes. With different accessories this system becomes a universal, indispensable device for electricity boards, industry and waterworks utilities.

Manufacturer: BAUR (Austria).

Description

In general the Locator Set can be applied for the following jobs:
  • route tracing of cables and metallic gas and water pipes
  • depth evaluation of cables and metallic pipes
  • cable selection
  • cable detection on live lines
  • location of cable and line joints
  • accurate location of cable faults according to the twist method

Features
  • Output energy up to 50 VA
  • Automatic or manual impedance adjustment
  • Charging unit and rechargeable battery integrated; battery or mains operation
  • Continuous or cyclical output

Technical data UL 30

Tracing

Receiving frequency for search coil     

2 kHz, 10 kHz, others selectable

Passive reception

50 / 60 Hz mains signal

Input sensitivity

< 10 nA

General

Filter

digital

Amplification

> 120 dB, adjustable

Headphone output

3 - pin jack plug, 6.3 mm

Operating temperature

-20….+55 °C

Degree of protection

IP54

Power supply

4 x 1.5 V cells (IEC LR 6)

Battery life (normal operation)

approx. 40 h

Weight

550 g

Technical data TG 20/50

Output power

0 - 50 VA in mains operation
0 - 20 VA in battery operation

Output current

8 A max.

Frequencies

2 frequencies, switchable
2 kHz ± 0,1 %, k-factor ≤ 1,5 % at 4 VA
10 kHz ± 0,1 %, k-factor ≤ 3 % at 4 VA

Output impedance

in 7 steps 1 / 3 / 10 / 30 / 100 / 300 / 1000 Ω
(automatic or manual adjustment)

Charging unit (incorporated)     

overcharge protection - when in mains supply,
charging is made in all operating modes

Low level discharge protect

instrument switched off before battery is completely empty

Operating time

at 20 VA; approx. 2.5 h

Operating temperature

-20 to + 50 °C

Power supply

Mains connection 110-120 V / 220-230 V / 240 V ± 10 %; 50 - 60 Hz
Internal battery 12 V; 9.5 Ah
External supply 12 V - 24 V DC (reverse battery protection)

Dimensions (w x h x d)

approx. 290 x 130 x 240 mm

Weight

approx. 9.5 kg


Standard accessories:

  • Transport case for Locator Set
  • Audio frequency transmitter TG 20/50
  • Carrying strap for TG 20/50
  • Mains supply cord for TG 20/50
  • 3m earth cable with earthing clamp
  • 2m connection cable black, touch proofed
  • 2m connection cable red, touch proofed
  • Universal receiver UL 30
  • Battery alkaline-manganese; 1.5 V; IEC LR 6 (4 pcs.)
  • Carrying strap for UL 30
  • Cover bag for UL 30
  • Headphones KH
  • Search coil SP 30
  • Auxiliary cable 25 m, on hand reel
  • Tapping terminals, black / red
  • Earth spike
  • User manual

Optional accessories:

  • Selecting coil AS 2/30 for 2,000 Hz
  • Selecting coil AS 10/30 for 10,000 Hz
  • Loop antenna RA 10
  • Clip-on current transformer AZ 10/D 70 mm
  • Clip-on current transformer AZ 10/D 80 mm
  • Clip-on current transformer AZ 10/D 125 mm
  • 5 m battery connection cable, black / red
  • Enclosed headphones (for suppression of ambient noise) KH S
  • Accessories set for sheath fault location with UL 30
Back to the list