LKZ-720 Wires and pipe locator
The LKZ-720 indispensable for detection of breaks in cables and wires, locating short circuits between leads, tracing shielded cables, cables in metal ducts, underground cables, tracing conductive water and heating pipelines.
Manufacturer: SONEL S.A. (Poland).
Description
Detection and tracing cables in ceilings, walls and floors
In response to the needs of customers, the LKO-720 has a specially designed 3D antenna that raises the precision of the wire tracing. Determine direction of wires in concrete up to 5 cm will not be a problem now.
Locating power points and switches in buildings
pulse generated by a LKN-720 transmitter with a specific frequency allows to locate and identify sockets and switches in energized and de-energized circuits.
Identification of fuses on the distribution board
Thanks to the precise sensor in LKO-720 and additional contact and non-contact probes, identify of breakers and fuses now will be easily and time-saving.
Possibility to tracing in no access conductors
LKO-720 with C-8 clamp used in the current mode or in other mode forcing current, allows to uniquely identify wire or cable with a forced current signal.
Non-contact detection of live cables
LKO-720 allows to precisely detect energized wires in air and concrete without additional probes.
Features
- Detection of wires and cables (live or not)
- Tracing underground cables
- Tracing conductive water and heating pipelines
- Flow and accurate locating the object
- Phase detection mode
- Operation in wide range of rated voltage, up to 500 V RMS
- Five modes of wire tracer operation - voltage, current, current-voltage, power and clamp
- Additional accessories enable precise localization - such as contact or non-contact probes and measurement clamp
|
insulation type
|
double, acc. to EN 61010-1
|
|
transmitter measurement category
|
III 600 V acc. to EN 61010-1
|
|
transmitter ingress protection rating acc. to EN 60529
|
IP67
|
|
receiver ingress protection rating acc. to EN 60529
|
IP40
|
|
transmitter power supply
|
4 x AA alkaline batteries
or 4 x Ni-MH rechargeable batteries
|
|
maximum transmitter operating voltage
|
500 V RMS
|
|
maximum depth of the analysed object
|
(“I” mode) 2 m
|
|
maximum range of contactless neon probe
|
50 cm (in air)
5 cm (in concrete)
|
|
receiver power supply
|
9 V 6LR61 alkaline battery
|
|
operating temperature
|
-10°C...+50°C
|
Standard accessories:
- LKN-720 transmitter
- LKO-720 receiver
- M-6 carrying case
- Test lead with banana plugs; 1 kV; 1.2 m; red
- Red crocodile clip 1 kV 20 A
- Test probe with banana socket; 1 kV; red
- Test lead with banana plugs; 1 kV; 1.2 m; blue
- Blue crocodile clip 1 kV 20 A
- Test probe with banana socket; 1 kV; blue
- Test lead with banana plugs on reel; 1 kV; 20 m; red
- Earth contact test probe (rod) 25 cm
- Non-contact probe
- Mini-USB cable
Optional accessories:
- N-1 transmitting clamp
- C-8 clamp
- C-3 clamp
- C-3 clamp adapter
- Double-wire test lead 2 m for N-1 clamp (banana plugs)
- Magnetic voltage adapter black / blue
- WS-05 adapter with UNI-SCHUKO angular plug
- Pin probe, black 11 kV (banana socket)
- Contact probe
- Universal magnetic hanging strap
- M1 hanging hook straps
