Logo_ESKAN.png
UA EN

KSG 200 Cable identification system

The KSG 200 cable identification system is used to identify single- and multi-core cables in a cable bundle or cable loom.

Manufacturer: BAUR (Austria).

Description

By using the KSG 200, the risk of accidentally cutting a live phase is significantly reduced. This way, you will avoid the following in future:
  • High level risk of endangering individuals by miscutting;
  • Unnecessary repair costs;
  • Supply failures for connected customers.
The cable identification system consists of a transmitter and a receiver with a flexcoupler. Intelligent electronics enable the communication between both components and make an absolutely safe cable identification possible through time and phase synchronising as well as automatic gain adjustment.

The operator-friendly and intuitive operation of the KSG 200 allows for it to be used immediately without extensively training the operator. The cable identification system is supplied in a convenient and stable transport case.

Features
  • Automatic recording and analysis of transmitting pulses (ATP analysis): Amplitude, Interval (time), Pulse direction (polarity)
  • Error-free detection of the pulse direction, even et a high loop resistance of up to 400 Ohm
  • High pulse current up to 180 A
  • Fully automatic gain adjustment
  • Expert mode for manual gain settings for clear cable identification on compact substations or mixed cable routes
  • Signal uncoupling by means of a flexcoupler for large cable diameters of up to 250 mm
  • Coupling of the transmitting pulse is effected in a galvanic or inductive manner by means of optionally available clip on current transformers
  • Current measurement up to 199 A
  • Essential for active occupational health and safety
  • Reliable and robust protection technology
  • Ergonomically designed receiver with integrated LCD display
  • No batteries required for the receiver
  • Transmitter with integrated rechargeable battery and possibility of external power supply (12 V port) optionally available

Transmitter

KSG 200

KSG 200 A

KSG 200 T

KSG 200 TA

 

For cable identification on disconnected cables

For cable identification on live cables

Pulse voltage

300 V

300 V

300 V

300 V

Pulse current

max. 180 A

max. 180 A

max. 180 A

max. 180 A

Pulse sequence

15 pulses/min

15 pulses/min

15 pulses/min

15 pulses/min

Power supply

Mains voltage

115/230/240 V, 50/60 Hz

–

115/230/240 V, 50/60 Hz

–

External supply

–

DC 12 V

–

DC 12 V

Rechargeable battery

–

NiMH rechargeable battery 12 V

–

NiMH rechargeable battery 12 V

Voltage-proof output

–

–

max. 400 V, 50/60 Hz

max. 400 V, 50/60 Hz

Measurement category

–

–

CAT IV/600 V

CAT IV/600 V

nominal DC or ACrms (line-to-neutral): 600 V

Protection class

II

not applicable in battery operation

II

not applicable in battery operation

Degree of protection

IP40

IP40

IP40

IP40

Receiver

KSG 200 / KSG 200 T

Sensitivity
- with galvanic impulse coupling
- with inductive impulse coupling


100 % at a loop resistance of 400 Ohm (I = 0.75 A)
100 % at a loop resistance of < 6 Ohm

Load current range

0 – 199 A ± 2%, 50/60 Hz

Battery life

approx. 1.5 h

Display

LCD display

Power supply

automatic recharging in the holder of the transmitter

Degree of protection

IP52

Dimensions (W x H x D)

approx. 100 x 25 x 211 mm

Weight
- with flexcoupler Ø 150 mm
- with flexcoupler Ø 250 mm


approx. 360 g
approx. 470 g

General information on the cable identification systems in the KSG 200 series

Ambient temperature (operation)

-10 to +55 °C

Storage temperature

-20 to +50 °C

Case dimensions (W x H x D)

approx. 594 x 174 x 435 mm

Weight of case with transmitter and receiver

approx. 6.2 kg (without battery)
approx. 7.7 kg (with battery)


Standard accessories:

  • Transmitter KSG 200 or KSG 200 T
  • Transmitter KSG 200 A or KSG 200 TA with integrated rechargeable battery (
  • Receiver KSG 200 (KSG 200 T) with flexcoupler ø 150 mm
  • Connection cable 2 m, with connection clips
  • Mains supply cord 1.8 m (KSG 200, KSG 200 T)
  • Charger incl. country-specific adapter (KSG 200 A, KSG 200 TA)
  • Vehicle charge cable (KSG 200 A, KSG 200 TA)
  • Transport case for all components
  • User manual

Optional accessories:

  • Clip-on current transformer AZ 10/D 70
  • Clip-on current transformer AZ 10/D 80
  • Clip-on current transformer AZ 10/D 125
  • Receiver KSG 200 with flexcoupler ø 250 mm
Back to the list