СА400 Oil Insulation Meter

СА400 is used for automatic measurement of Tan delta (tgδ), relative permittivity (εr), specific resistance (ρ) of the transformer oil and other liquid electrical insulating materials.

Manufacturer: OLTEST (Ukraine).

Warranty: 18 months.

Features

Fully automated standard tests. Supports standards: GOST 6581- 75 and GOST R IEC 60247-2013.
Monoblock design.
High measurement accuracy.
Low oil volume for testing.
Flat test сell of three-electrode type.
Easy to assemble and clean test cell.
High test productivity due to a special test cell heating and cooling algorithm.
High precision oil temperature control.
Test process control with LCD touchscreen.
Up to 1000 test results saving.
Downloading test results via the USB interface, using a standard USB flash drive.
Small size and low weight.

Technical specifications

Measured values	Range	Accuracy
Tan delta (tgδ)	0.0001 … 1.0	± (0.03·tgδ+0.0002)
Relative permittivity (ε_r)	1 … 15	± 3 %
Specific resistance (ρ)	10⁷ … 10¹² Ωm 10¹² … 10¹³ Ωm	± 3 % ± 7 %
Settable values
Test AC voltage	2000 V	± 2.5 %
Test voltage frequency	50 Hz	± 0.1 Hz
Test DC voltage	500 V	± 2.5 %
Test temperature	10 … 95 °С	± 1 °С
Measurement time
Oil sample test time, including heating up to 90 degrees and measurement, no more	25 min	—
Oil sample test time, including heating up to 90 degrees, measurement and cooling down to 50 degrees, no more	40 min	—
Power mains
Rated voltage	220/230 V АС
Rated frequency	50 Hz
Power consumption	≤ 200 VA
Operating conditions
Operating Temperature	10…40 °С
Relative Humidity	up to 80% non-condensing
Technical parameters
Size, no more	385×107×280 mm
Weight, no more	11 kg
Test cell parameters
Design	flat test cell of three-electrode type
Volume	14 см³ (± 1 см³)
Material	stainless steel
Insulation	teflon
Electrode spacing	2 mm (± 0.1 mm)

Complete set

Standard accessories:

СА400.
Power Cord.
Test Cell (2 pcs.)
Operating manual.
Passport.
Transport box.

Optional accessories:

Calibration Cell.

Documentation

CA400 Datasheet_EN.pdf